H802RA Four Port Output Controller RGB RGBW Pixel Ethernet DMX Led Support DMX512 UCS512 UCS1903 WS2811 SK6812 APA102

Digital to Analog ConvertersH802RA Four Port Output Controller RGB RGBW Pixel Ethernet DMX Led Controller Support DMX512 UCS512 UCS1903 WS2811 SK6812 APA1021. Features(1). Four ports control maximum 4096 pixels (WS2812 for example). But for DMX512, each port outputs 512 channels.(2). Support ArtNet protocol, 4 universes(each 512 channels) output when H802RA works with Madrix.(3). Allocate address for DMX512 chips (for example UCS512, TM512)(4). Controlled by master controller or PC.(5). Transmission distance between two controllers is up to 100 meters.2. Supported Driver ChipsDMX512, HDMX, LPD6803, LPD8806, LPD1882, LPD1889, LPD1883, LPD1886, TM1812, TM1809, TM1804, TM1803, TM512, TM1926, TM1913, TM1914, TM1814, UCS6909, UCS6912, UCS1903, UCS1909, UCS1912, UCS512, UCS8904, APA102, APA104, P9813, WS2801, WS2803, WS2811, WS2812, WS2821, SM16716, SM16711, INK1003, LX1003, MY9221, MBI6021, MBI6024, LD1510, LD1512, LD1530, LD1532,etc.Note: H802RA supports more than the chips listed above(for example UCS2903 has the same sequence diagram with UCS1903, H802RA supports them all). 3. Product Display4. Connection Diagram(1). Connect to master controller, software is LED Build. Programs are stored in SD card.LED Build download link: https://drive..com/open?id=0B1gzqyV6hfOgN2pkMV8yMFozYzQLED Build Tutorial Video: https://drive..com/open?id=0B1gzqyV6hfOgUnFjeG9EM3VRZjA(2). Connect to computer, software is LED Studio or Madrix.LED Studio download link: https://drive..com/open?id=0B1gzqyV6hfOgNEtYT2o0LWdDNG8H802RA to PC manual: https://drive..com/open?id=0B1gzqyV6hfOgeGI1M2JaYi1URW85. Basic Madrix Working ProcedureConfigurations before MADRIX(1). Connect H802RA to PC, allocate an IP address for H802RA.(2). Open LED Studio, click "setting" -- "H802RA setting", pops up the following dialog box. Regarding the rest settings of MADRIX, please refer to the video.6. Set Address for DMX512 chips(1). Please connect your lamp to controller according to the connection method i post above(under PCB Layout).(2). In LED Studio, click "Setting" -- "H802RA Setting".After several seconds, lamp will turn white then green, please repower the lamp.H802RA can address for maximum 1024 pixels.7. LED Studio basic operationMapping8. SpecificationsInput Voltage: Power Consumption: 1.3WDrive Pixels Number: 4096Weight: 1KGDimension: L163 x W155 x H54Carton Size: L205 x W47 x H21PCB Size: L119 x W47 x H21==========High-concerned chemical : NoneFeatures : GND-GND,CLK(D-)-CLK(D-),DAT(D+)-DAT(D+)Model Number : H802RA LED studioOscillation frequency : 50/60hzConnection Mode : TTL SPIVoltage : 110-240VMaterial : 1wWattage : 1Power : ACMax. Load Power : 1wRemote Distance : noneApplicable Lights : led pixel lightsControled Method : by master or PCItem Type : RGB controlerControled Method : controlled by masterdrive pixels number : 4096universes number : 4Connection Mode : GND-GND,CLK(D-)-CLK(D-),DAT(D+)-DAT(D+)

• Digital to Analog Converters
• H802RA Four Port Output Controller RGB RGBW Pixel Ethernet DMX Led Controller Support DMX512 UCS512 UCS1903 WS2811 SK6812 APA102